rbt said:
Is it? It's a popular value but have we ever seen a source of it like architectural drawings or a survey? I'd love to know where the bottom is for that measurement.

Automated tools like Google Earth give it a lower value from King to mechanical.
Click to expand...


I was just going by what most sites I come across say, including this one.
 
Forgive me if this has already been asked and answered, I scrolled up many pages and did not see an answer. Will this tower top out at the maximum approved height, or will we be getting truncated version?
 
EBT said:
Forgive me if this has already been asked and answered, I scrolled up many pages and did not see an answer. Will this tower top out at the maximum approved height, or will we be getting truncated version?
Click to expand...

Nobody really knows for sure, but Northern Light posted something a while back that seemed to be the hardest evidence so far that it will be stopped at it's original height.
 
Koops65 said:
Please, I urge everyone to go to Google Earth and measure the height yourself. Many have already done so, and the height they all came up with is 292 metres. Find out for yourself, don't take somebody else's word for it.
Click to expand...
How do you use Earth to measure a given building's height then? Doesn't seem to be an apparent way to do that from a first time visit.
 
First make sure you're in 3D mode. Then click on Add a Placemark. Hold your cursor over the object you wish to measure. The mechanical room of FCP shows me 369 metres above sea level, down at the very bottom right. Move the cursor a little bit to show the height of the main roof. It shows me 363 metres above sea level. That means the Mech. is 6 metres high. Then move your cursor a bit more so it shows the height of the sidewalk beside the tower. This shows me 78 metres above sea level. A quick calculation shows an overall height of 291 metres. That's close enough for a non-expert like myself to say that FCP isn't 298 metres...
 
IMG_0640.jpeg


IMG_0641.jpeg
 
Koops65 said:
First make sure you're in 3D mode. Then click on Add a Placemark. Hold your cursor over the object you wish to measure. The mechanical room of FCP shows me 369 metres above sea level, down at the very bottom right. Move the cursor a little bit to show the height of the main roof. It shows me 363 metres above sea level. That means the Mech. is 6 metres high. Then move your cursor a bit more so it shows the height of the sidewalk beside the tower. This shows me 78 metres above sea level. A quick calculation shows an overall height of 291 metres. That's close enough for a non-expert like myself to say that FCP isn't 298 metres...
Click to expand...
Thank you. I was asking this out of curiosity. It was not my intention to derail the thread by doing so, so my apologies for that.
 
vinny_the_hack said:
Wouldn't the architectural drawings accurately indicate a building's height...unless the construction crew is totally inept?
Click to expand...
The as-built drawings should accurately indicate the height even if the construction crew was totally inept.

In theory these are held by Toronto Building but access is restricted.
 
Last edited:
rbt said:
The as-built drawings should accurately indicate the height even if the construction crew was totally inept.

In theory these are held by Toronto Building but access is restricted.
Click to expand...
I read that somebody on this site had (access to) some kind of drawings that indicated height. I think it was the guy who posts progress drawings about once a month.
 
You must log in or register to post here.

Back
Top